vaporizer, check valve for burner, stove lead

Description

It is the lead packing used in the burner.
It is a bundle of components.
The left side is for vaporizer and the right side is for check valve.
It is for check valve.
It is a little big and thin.
This is a miniature car.
Left for vaporizer
Right side for check valve,
The check valve has a larger hole.
It is for check valve.
You can attach the lead packing to the check valve bundle as shown below.
If you remove it often, you will only see a bunch of check valves, which means that the lead packing is attached to the body.
At this time, use a long wire to pull the lead.
If it does not leak, it does not have to be removed.
Since lead is not in the check valve, if you insert another lead packing, it will not be assembled or air will be blown.
Please note
How to replace vaporizer lead.
First, the torch is slightly heated, and when it is digged with an awl, it falls well.
If it does not fall, it will fall beautifully if you sprinkle it on newspaper after heating hotly.
It is the state that it sprinkled lightly after heating the newspaper.
You can scrape it off with the remaining spoon
Push the lead you want to replace.
It does not matter if it is distorted.
If you work after gently applying heat, it is softer.
When the lead is inserted, heat it so that it does not dissolve with the torch, and then quickly assemble it to the body, and it will settle like a picture.