-40%
Pegboard Paper Towel Holder with Peg Board Shelf by MADD Tools | Black Pegboard
$ 23.98
- Description
- Size Guide
Description
Pegboard Paper Towel Holder with Peg Board Shelf by MADD Tools | Black Pegboard Accessories | 1/4'' Heavy Duty Pegboard Spool Holder | Pegboard Wire HolderProduct Description
Designed to fit board of all thickness
Pegboard usually comes in hardboard or metal. Both are sturdy, but the metal boards are significantly thinner.
As a result, pegboard attachments designed for classic hardboard slant downwards when used on metal board.
That's why we've added a spacer and 5 screws.
Spacer
Optionally
: the spacer can be mounted in between the pegs and metal boards, so there's no 'gap'. This makes sure that your towel holder hangs straight at all times.
Screws
Optionally
: the lower pegs are wired, and 5 screws are provided with the towel holder. For a more permanent fix, you can attach these screws to the back of your towel holder.
Included with this product
1 spacer
5 screws
1 pegboard paper towel holder
Snug & sturdy.
Opposed to most pegboard brands, we've made the conscious decision of exclusively supporting boards with
holes that have a 1/4'' thickness.
Because we don't like' wiggle', and we love it when
everything fits snugly.
Front reload.
2 in 1 solution.
Pegboard space is precious
- so we don't want any of it to go to waste.
The top of the towel holder is a neat little shelf that can hold up to
50LBS
worth of spray cans, bolts, screws, rope, etcetera.
Shelf surface of 4'' x 13''.
Reload your paper towel roll, hassle-free.
Front-reload
We found it important that you wouldn't have to reload a paper towel roll from the side of the holder. If that was the case, you would've had to take tools off of your pegboard whenever you needed to replace the roll.
That's why we opted for a pivotal reload system that makes it easy to
reload the paper roll from the front
. Just retract the pin, pivot the rod towards you and replace the roll. Zero hassle.
Seriously heavy duty. 100% metal.
For standard pegboard with 3/16’’ or 1/4’’ holes.
Fits board with every thickness.
Fits almost every paper towel roll
The paper towel compartment has enough room for any paper towel roll with
dimensions under 6.25'' x 13''.
Standard paper towel is usually 6'' x 11''.
The roll shown in this image has a diameter of 5.5'' and height of 11''.
The rod that holds the paper towel is 'fixed'. This means that it won't spin endlessly when ripping off a sheet of paper.
Full Metal
?
?
?
?
Premium Powder Coating
?
?
?
?
Super Heavy Duty
?
?
?
?