IRDA WELDER T-862 SMD & BGA Soldering & Rework Station Infrared Working

Description

UP FOR BIDS HERE IS A VERY NICE, USED IRDA WELDER INFRARED SMD & BGA SOLDERING AND REWORK STATION. UNIT IS IN VERY GOOD OVERALL CONDITION, HAS BEEN TESTED TO POWER ON AND PRODUCE HEAT. NO APPARENT DAMAGE, BROKEN OR MISSING PARTS. IF YOU DO ANY SOLDERING OR RE-FLOWING OR RE-BALLING WORK, YOU NEED A UNIT LIKE THIS. SHIPPING WILL BE A FLAT RATE OF .00 TO ANYWHERE IN THE LOWER 48 US STATES ONLY. (INFORMATION PROVIDED BELOW IS FROM THE MANUFACTURER AND I AM NOT RESPONSIBLE FOR ANY INCORRECT INFORMATION PROVIDED)
MORE INFO
Infrared soldering technology with independent exploration capabilities via three (3) focus lenses which are included with the package.
Focused infrared heat to target components for removal/replacement/re-work.
The Workstation has a 120 X120mm a 650W controlled Pre-heating System.
Infrared heat source bulbs are long lasting, inexpensive & easily replaced.
Processor controlled set-point regulated temperatures with thermocouple feed-back.
Integrated and adjustable Infrared (IR) eye protection.
Surface Mount Technology (SMT) components 15-35mm in size.
Suitable for Micro BGA component.
The T-862 system also contains a temperature controlled touch-up iron.
Product description
Introduction:
The T-862 uses an Infrared source and optics to target heat to individual components without dislodging other SMT parts by way of eddies in air currents unlike Air Re-Work systems
Infrared soldering technology with independent exploration capabilities via three (3) focus lenses which are included with the package.
Technician focused infrared heat makes it easy to target most component removal/replacement and re-work.
The Workstation has a 120 X120mm a 650W controlled Pre-heating System.
Infrared heat source bulbs are long lasting, inexpensive and easily replaced.
Processor controlled set-point regulated temperatures with thermocouple feed-back.
Integrated and adjustable Infrared (IR) eye protection.
Suitable for the entire component range, especially Micro BGA components.
The T-862++ system also includes a conventional temperature controlled touch-up iron.
Output power: 800W
Infra-red lamp body temperature adjustable: 100-250
Preheating dish temperature adjustable: 60-200
What you get:
T-862 Infrared Unit x 1
Focus holder x 1
Focus holder control knob x 1
Fasten nut for focus holder x 1
Steady ring x 1
Fasten nut for steady ring x 1
Power Cable (110VAC or 200VAC) x 1
5mm Fuse, 10A 250VAC(Spare) x 1
Conventional soldering iron x 1