-40%
Dapol B805 -100ml Motorised Track Cleaner (B800) Cleaning Fluid - Tracked48 Post
$ 7.9
- Description
- Size Guide
Description
MenuHome
About Us
Returns
Contact Us
View Feedback
Add to Favourites
Dapol B805 -100ml Motorised Track Cleaner (B800) Cleaning Fluid -
Main Description
DAPOL LIMITED
B805 - MOTORISED 5 WAY TRACK CLEANER FLUID - 100ml PLASTIC BOTTLE
FLUID FOR BELOW
Dapol B800 HO/OO gauge DCC ready 5way track cleaner.
This model uses the latest in technology to aid you keeping your track clean and is perfect for those hard to reach places such as tunnels, at the back of layouts or under catenary wires.
It is DCC ready and features an 8pin DCC socket that can take either UK or USA configured decoders (orientated), and needs a chip that can operate the motor to function on DCC.
It can be run on DC as a normal item with the motor sharing power with the locomotive that is needed to haul it. There is an onboard on/off switch to aid this.
The motor within the unit powers, at the modellers choice, either the vacuum function or the sprung abrasive/polishing head.
There is also an under body brush for basic removal of dirt/fluff etc, and a reservoir that can be filled with any non flammable, plastic friendly track cleaning solution that feeds down onto a sponge (included) that rubs the rail head (to be used before the sprung buffing head).
It is fitted with the best of darkened profile wheels set to a 14.4mm back to back and to RP25.110 standards, and is fitted with standard UK type couplings within an NEM coupling box.
5 way refers to, liquid application, sprung polishing, abrasive scraping, brushing
and vacuuming.
made with love by
jarilo
design
jarilo
design
DAPOL LIMITEDÂ B805 - MOTORISED 5 WAY TRACK CLEANER FLUID - 100ml PLASTIC BOTTLE FLUID FOR BELOW Dapol B800 HO/OO gauge DCC ready 5way track cleaner. This model uses the latest in technology to aid you keeping your track clean and is perfect for those hard to reach places such as tunnels, at the back of layouts or under catenary wires. It is DCC ready and features an 8pin DCC socket that can take either UK or USA configured decoders (orientated), and needs a chip that can operate the motor to function on DCC. It can be run on DC as a normal item with the motor sharing power with the locomotive that is needed to haul it. There is an onboard on/off switch to aid this. The motor within the unit powers, at the modellers choice, either the vacuum function or the sprung abrasive/polishing head. T