APEC Intense Stainless Steel Ultra-Violet Sterilizer Water Filtration Kit

Description

Intense Ultra-Violet Disinfecting Filtration
Eliminate up to 99.99% of bacteria, viruses, and micro-organisms that thrive in non-chlorinated water sources.
UV Lamp Upgrade For RO Systems
The primary usage for a UV light
is to disinfect filtered water at a certain flow rate. Bacteria, viruses, and other microorganisms are destroyed by the UV interfering with the DNA and RNA in the organisms' reproductive cycles. In theory, the reverse osmosis membrane already removes bacteria and viruses from the water, therefore, if you are on a municipal water system (tap water) in the U.S., chances are that you should not need a UV light on top of our ULTIMATE RO System. But, if your water source is known to be unsafe with microorganisms and you want to have extra protection, then you can add an UV as an additional stage to disinfect water.
APEC ultra violet Upgrade Kit can be added on to any existing RO system or replace old UV unit. Stainless steel reactor vessel, quartz sleeve, extra tubing, 2 Elbow fittings, 2 mounting clips, electronic ballast and UV lamp are all included.
Specifications
Model
UG-UVSET-1-4-SS
Maximum G.P.M.
1.0
Dimensions
2"O.D. X 10.50"L
Watts
10
Ports
1/4"
Operating Conditions
Lamp Life
1 Year Plus Continuous Operation
U.V. Output
30,000 Micro-Watts At Maximum flow
Inlet Water Temperature
35° - 104°F
Maximum Operating Pressure
125° P.S.I.
Maximum Static Temperature Rise
16.1°F Above Ambient
Operating Voltages Available
120V - 60HZ