-40%
8 x 12 Golding & Co. Jobber No. 6 Letterpress aftermarket steel chase
$ 50.16
- Description
- Size Guide
Description
Offered: One aftermarket steel chase Golding & Co. Jobber No. 6 (8' x 12') Letterpress Chase.This is a unbranded steel chase. Steel chases like this one were somewhat common in letterpress equipment catalogs from the early 1900's. Golding & Co. only offered cast iron chases, the steel chase is a bit more reliable as they were not as liable to crack/break when an overly enthusiastic press person over tightened the quoins in a lockup. These aftermarket steel chases were offered at higher cost than original Cast iron. However that extra cost was minor over the longevity of a steel chase over a cast iron one, especially in a busy letterpress shop.
Chase is in good usable condition with no flaws, cracks or repairs. I laid the chase on my imposing stone and pressed on opposite corners checked for any rocking; a sure sign of a warped chase. I removed all residual dried on ink and crud.
Please Note:
This is an aftermarket Golding chase, please verify that the
following
dimensions fit your press.
The approximate inside dimensions of the chase offered is 8" x 11 5/8". The exterior of the chase measures 9 3/4" x 13 7/16".
This offering will ship via FedEx Ground/Home Delivery.
Shipping includes insurance coverage as well as FedEx Tracking. Purchases ship no later than next business day after receiving your payment. FedEx delivers to most locations in the USA in 1 to 5 business days.
Please do not hesitate to contact me if you have any questions in regards to this offering.